Amends a952fd7d5b03ce1968ec58871fbb8b3600895900.
The mentioned commit started to skip QObjectPrivate::isSignalConnected() call if
the connectionLists are dirty, which lead to tst_qqmllanguage::receivers() test
inside qtdeclarative breaking.
Declarative signals were not checked if that function was not called. It
previously also wasn't called for signals higher than 64. Fix that by checking
for declarative signals after the connectionLists search is unsuccessful.
Fixes: QTBUG-71550
Change-Id: Ifcb5fdd0dc9a6b14b9f448a016fd09356a55b985
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The bitmap cache for the first 64 signals being connected was only set when the
connection is added. It was never unset when the connection was removed.
Internal use of the connectedSignals bitmap is not hurt by it occasionally
saying a signal is connected even though it is not, since the purpose of those
checks is avoiding expensive operations that are not necessary if nothing is
connected to the signal.
However, the public API using this cache meant that it also never spotted
signals being disconnected. This was not documented. Fix the behavior by only
using the cache if it is up to date. If it is not, use a slower path that gives
the correct answer.
To avoid making disconnections and QObject destructions slower, the cache is
only updated to unset disconnected signals when new signal connections are
added. No extra work is done in the common case where signals are only
removed in the end of the QObject's lifetime.
Fixes: QTBUG-32340
Change-Id: Ieb6e498060157153cec60d9c8f1c33056993fda1
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
We need to override this snippet for the documentation
we generate for Qt for Python, and it is easier to have
it on a separate file.
Task-number: PYSIDE-801
Task-number: PYSIDE-691
Change-Id: Ideb5b6af25024279f167137d3b65660bb9c96a7e
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Weak pointers are zeroed before destroyed() is emitted. This makes sense
because the signal is called "destroyed()", not "aboutToBeDestroyed()",
and the code has been like this for a long time.
Change-Id: Ic852fe354405e328d1922a75931e7eb7bf651b26
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add it to configure.json and replace all occurrences of QT_NO_THREAD
with QT_CONFIG(thread). Add conditions for other features that depend
on thread support. Remove conditions where we can use the QMutex and
QThreadStorage stubs.
Change-Id: I284e5d794fda9a4c6f4a1ab29e55aa686272a0eb
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
[ChangeLog][QtCore][QObject] Fixed a bug in setProperty() that caused a
property change not to take effect if the old value compared equal using
QVariant's equality operator, but the values were not strictly equal.
Task-number: QTBUG-69744
Change-Id: I00e04a465fcf4fc1a462fffd1547885861a07a64
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Change-Id: I4f9033660c06686d7b499ec6d28be2c3b64353e2
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Martin Smith <martin.smith@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Link to the data ownership section of the QML documentation to elaborate
on the special rules that apply for invokable functions that return
QObjects.
Change-Id: I41ea9089468c9505807cf1fde22be759b397a6d3
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
We need to add the \relates command otherwise it won't appear in the documentation
Change-Id: I134776c1528445761a7539cf687e4855d39eb7a7
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Sometimes it is hard to find the line, when the warning
"QObject::connect: invalid null parameter" appears in the log.
This change adds the class names of the sender and receiver
to give a hint where to search for the wrong call to connect.
Change-Id: I00cead7d943f96d60f198cb3f0bed34ba10285c5
Reviewed-by: André Hartmann <aha_1980@gmx.de>
Use QT_CONFIG(regularexpression), disentangle it from QT_BOOTSTRAPPED,
switch it off in the bootstrap build, remove the #ifdefs from
qregularexpression.{h|cpp}, and add QT_REQUIRE_CONFIG(regularexpression)
to the header.
qregularexpression.{h|cpp} are already correctly excluded in tools.pri
if !qtConfig(regularexpression).
Change-Id: I21de154a6a118b76f99003d3acb72ac1e220d302
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The macro Q_DECLARE_INTERFACE declared some qobject_cast() functions
that clang-qdoc must not see in the contexts where the macro is used.
This update prevents that from happening by ensuring that Q_CLANG_QDOC
is not defined when the macro is defined.
This update also adds a \fn command for a declaration of qobject_cast()
that was missing in the documentation. There are two versions of the
function, one with a const parameter and one with a non-const parameter,
and they both share one qdoc comment.
Change-Id: Ic74d0aaae62767cd0391474ee95ae3f4f820b06e
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
When a deleteLater event is queued, a check if done if the same event
for the same receiver is queued before by scanning all pending events.
This leads to quadratic behavior, which is quite noticeable. By using
an unused bit in QObjectData, this can be prevented. Now the duplicate
event scanning in QCoreApplication is only done for the quit event.
Task-number: QTBUG-65712
Change-Id: Ie505acbbec802f91ebd0b94ac067e362c2476113
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
clang required adding template clauses to a few \fn commands.
There were also a few cases where Q_QDOC was changed to Q_CLANG_QDOC
and a few cases where special declarations for qdoc were removed in
favor of the actual declarations.
Unfortunately, a few qdoc warnings remain unfixed for classes
QObject and QMetaType, but these might be caused by minor bugs
in clang-qdoc itself, so they will be fixed there.
Change-Id: Ib586628cb6d2aa9cf4bcad303b5af09b412a7e57
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
old style connects have protection against null sender and null receiver,
but new style only had against null sender.
Change-Id: Ie555ac078412918e60c3b60830fe1f3abfb7f5af
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
There were four dummy declarations for struct QMetaObject that were
needed by old qdoc to allow documentation of some very complicated
function signatures that old qdoc could not parse. clangqdoc can now
parse these signatures, but, unfortunately, old qdoc is still used to
parse \fn commands in .cpp and .qdoc files, so the dummy declarations
are still needed in struct QMetaObject. However, clangqdoc now
sees that two of the four dummy declarations are actually duplicates
of the other two, and then old qdoc complains when it can't find all
four of the function nodes, when it parses the four \fn commands.
This update removes the duplicate dummy declarations and the two
redundant \fn comments. The remaining two \fn comments are
updated accordingly.
This change also moves a couple of qdoc comments so they are located
with the function definitions that they are documenting.
Change-Id: I85e2492ba0380b01c3700b3dc7db0913d6429701
Reviewed-by: Martin Smith <martin.smith@qt.io>
This change supplies several missing class qualifiers for
parameter types and function return types.
Change-Id: I569026e4da0948902fcc13557003d3748b85dd82
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Remaining uses of Q_NULLPTR are in:
src/corelib/global/qcompilerdetection.h
(definition and documentation of Q_NULLPTR)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: If6b074d91486e9b784138f4514f5c6d072acda9a
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Does not make much sense now that we can connect to lambda functions
[ChangeLog][QtCore][QSignalMapper] QSignalMapper is now marked
as deprecated.
Change-Id: I89135f23fdf16b42142a125eb7c9a86084c90bfc
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
Compiler support for lambda functions and variadic templates is
required since Qt 5.7, so no need to mention in the documentation
what happens if the compiler doesn't support it.
Change-Id: I5caeaa0bd7f0edce81e22e22964e0b7dd042c719
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Solves a data race found by TSan.
Since thread and threadId are QAtomicPointer, I've removed the explicit
initialization in the QThreadData constructor
Task-number: QTBUG-58855
Change-Id: I4139d5f93dcb4b429ae9fffd14a34082f2683f76
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
In client code I often see code like:
startTimer(1000); //ms
Let the code to be self-explaining. So provide overload
method that takes std::chrono::milliseconds as arg.
QTimer already has std::chrono support, but QObject does not.
Change-Id: Ib348612ce35f1a997b4816fe9e864775cbcbec16
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
We now have qtHookData, which is a better (and cheaper) way to add hooks
for object creation and deletion. For binary-compatibility reasons we
cannot remove it in Qt5.
Change-Id: Iecd9f4e1195f90279c395845fa26c6301b67b9a1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
qt_find_obj_child is a vestige from Qt3. It is not used nor
exported. It can safely be removed.
Change-Id: Ief6164c361a369559e067b99880c357e421e6342
Reviewed-by: Martin Smith <martin.smith@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
They don't modify "this", so they should be const. Mark
the existing non-const overloads for removal in Qt 6.
[ChangeLog][QtCore][QObject] QObject::dumpObjectInfo and
QObject::dumpObjectTree now have const overloads.
Change-Id: If9fb15692d2d1536930f86d043d688236d4b778a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
