Projects were modified using the tool at:
https://git.qt.io/alcroito/cmake_refactor
A couple of examples had to be adapted manually, due to them including
more than one app per example subdirectory.
The INSTALL_EXAMPLESDIR and INSTALL_EXAMPLEDIR assignments were
removed.
The install(TARGETS) calls were modified according to our
documentation snippets for qt_generate_deploy_app_script.
A qt_generate_deploy_app_script call was added for each executable
target.
Note that the deployment step will be skipped in the CI for now,
because we enable QT_DEPLOY_MINIMAL_EXAMPLES and thus
QT_INTERNAL_SKIP_DEPLOYMENT, and also because standalone examples
are not enabled yet, and deployment is disabled for in-tree (so
no-standalone-example) prefix builds.
The install(TARGETS) calls for each example will still run,
installing the examples into an installed_examples directory, that
will not be archived by the CI.
Pick-to: 6.7
Task-number: QTBUG-102056
Task-number: QTBUG-102057
Change-Id: Ida389bbad41710b2ae5da4d95e2d85be9e0cd9ce
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Example takes precedent over build system file type.
According to QUIP-18 [1], all examples file should be
LicenseRef-Qt-Commercial OR BSD-3-Clause
[1]: https://contribute.qt-project.org/quips/18
Pick-to: 6.7
Task-number: QTBUG-121787
Change-Id: Id348a89884bb309b96abb31077f14a51086b5d0c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kai Köhne <kai.koehne@qt.io>
Partly because it also saves to CBOR, but also because our guidelines
say to avoid using "Example" in the title.
Pick-to: 6.6 6.5
Task-number: QTBUG-111228
Change-Id: Id858475a6b0474228cfe8044e188cc763f56e3a8
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Specifically, prune it to fit on a single line.
Much of what it was saying was implicit in its context already.
It also neglected to mention CBOR's part in the story.
Pick-to: 6.6 6.5
Task-number: QTBUG-111228
Change-Id: I161a345cbbea8b706490fcbbadecd01b8946af31
Reviewed-by: Konrad Kujawa <konrad.kujawa@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
I overrode clang-tidy where it uglified or obfuscated and did some
clean-up provoked or made possible by its changes. Konrad pointed out,
in review, a constructor that could be = default; it could, in fact,
vanish entirely as a result.
Pick-to: 6.6 6.5
Task-number: QTBUG-111228
Change-Id: I9b7744a3abaa29e6f9e0689d0f6985bfd88cd0fd
Reviewed-by: Konrad Kujawa <konrad.kujawa@qt.io>
A couple more compilation units could use Qt::StringLiterals. Prefer
QL1SV for the code constants, to keep code small. Convert fpToString()
to take QL1SV instead of const char *, with suffix empty by default.
Also rearranged some spacing, some if it suggested by clang-tidy.
Pick-to: 6.6 6.5
Task-number: QTBUG-111228
Change-Id: I03d810d52afcd4a760d18f2553914b75af716b74
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Marc disagreed with clang-format on some, which are thus excluded.
Pick-to: 6.6 6.5
Task-number: QTBUG-111228
Change-Id: I1402274635dba866a8160a68211874cb11dcfa61
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Remove the xml prefix, only reference the example by title. The
streambookmarks example is gone, so remove that link.
Change-Id: Ie3a77be24f60fca9e8f9ef0323f0ea5ffc904075
Reviewed-by: Safiyyah Moosa <safiyyah.moosa@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The documentation talked about using CBOR to keep folk from reading,
where (of course) it merely makes it more obscure (and compact). Make
clear that this just makes it less easy and mention the tool that
makes it easy again.
Task-number: QTBUG-111228
Pick-to: 6.5
Change-Id: I472acda4b7533db41ab0e78b694e0256b34d2b40
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Basically, instead of re-creating QTextStreams all the time, create it
once, in main(), and then pass it to print() alongside the int
indentation.
Also fix a hard-coded indentation value that should have been relative
to the caller's indentation level.
Pick-to: 6.5 6.2
Task-number: QTBUG-108857
Change-Id: I811447295c9c3fdef23f61aff31ebe82941eb3b4
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This follows up to commit 9834e80833783357743b2a5abe3071760638effb,
fixing an accidental flip to the meaning of keywords on the
command-line. If the first word is "load" we should load a prior game,
not start a new one; if the second is "binary" we should use CBOR, the
binary format, not JSON.
Pick-to: 6.5
Task-number: QTBUG-111228
Change-Id: If29070777daf68f2f959bc1ec4ffd67ba90b28ba
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
JSON, unlike, say, QDataStream, allows building up objects independent
of some central object, and combining them into a QJsonDocument
later. This suggests returning QJsonObjects from a toJson() const
method instead of having the caller supply a QJsonObject. Doing it
this way enables transparent move semantics to kick in, too.
For deserialization, use a fromJson() named constructor for value-like
classes (where identity doesn't matter, only equality). Keep using
read(), too, and add a note to explain when to use which form.
Also, avoid the triple lookup from
if (json.contains("key") && json["key"].isSoughtType())
mFoo = json["key"].toSoughtType();
by using C++17 if-with-initializer and showing the trick with
Undefined never being of isSoughtType():
if (const QJsonValue v = json["key"]; v.isSoughtType())
mFoo = v.toSoughtType();
Adjust the discussion to match the new code, up the copyright years
and rename some qdoc snippet markers from nondescript [0]/[1] to
[toJson]/[fromJson].
Task-number: QTBUG-108857
Pick-to: 6.5 6.4 6.2
Change-Id: Icaa14acc7464fef00a59534679d710252e921383
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
- include what you use
- make 'args' const, so we don't detach in op[]
- make boolean variables const
- use QString::compare(lhs, rhs, Qt::CaseInsensitive) instead of
lhs.toLower() == rhs
- use new _L1 UDL
- fix indentation of a return statement
Pick-to: 6.5
Change-Id: If9da4fbe975d9a97939ea01558b2a8cef7ad3a24
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Includes should be ordered from most specific to most general. This
means that project-specific includes always come before Qt includes.
This example didn't follow that guideline. Fix.
Amends 88e8094f18e6581f2b652eb3d82f514ecf687046.
Task-number: QTBUG-108857
Pick-to: 6.5 6.4 6.2 5.15
Change-Id: Iafdae9dd8e70ff99882c4344a023a21d15fa3c54
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
A QString is not a full representation of a Level, so the
Level(QString) ctor should be explicit.
Pick-to: 6.5 6.4 6.2 5.15
Task-number: QTBUG-108857
Change-Id: I24b705139e61c4aaf59cb0aad3b536013e0d07df
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Includes should be ordered from most specific to most general. This
means that project-specific includes always come before Qt includes.
This example didn't follow that guideline. Fix.
Task-number: QTBUG-108857
Pick-to: 6.5 6.4 6.2 5.15
Change-Id: I42727ff8bdef5336368cde349cbcb8d10bb6289f
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
We (almost) only build apps, for which PRIVATE linkage makes more sense.
Change-Id: I09a509c3fb33a00cdfdede687b3f95d638f42091
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
This is what we promote also in the documentation.
Change-Id: If91aebafe861b0c934acbb2c69afd182abc3345d
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Add documentation of usage of CBOR in convert and cbordump examples,
add a CBOR overview, and add links to them other places in the
documentation.
Task-number: QTBUG-85912
Change-Id: I518792db63647bf9ddd4507d8d4b7ef056192f82
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
CMakeLists.txt and .cmake files of significant size
(more than 2 lines according to our check in tst_license.pl)
now have the copyright and license header.
Existing copyright statements remain intact
Task-number: QTBUG-88621
Change-Id: I3b98cdc55ead806ec81ce09af9271f9b95af97fa
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Replace the current license disclaimer in files by
a SPDX-License-Identifier.
Files that have to be modified by hand are modified.
License files are organized under LICENSES directory.
Task-number: QTBUG-67283
Change-Id: Id880c92784c40f3bbde861c0d93f58151c18b9f1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
CMAKE_INCLUDE_CURRENT_DIR is not necessary anymore for moc since
CMake 3.8: https://cmake.org/cmake/help/latest/release/3.8.html#other-changes
CMAKE_AUTORCC should not be used anymore. Instead, we now use
qt_add_resources() or similar
Enable CMAKE_AUTOUIC only if .ui files are present.
Pick-to: 6.3
Task-number: QTBUG-87643
Change-Id: I835e2994cd5dba9918136999499b9077961b616c
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Both are FALSE by default, so no point in explicitly setting
them to FALSE.
In addition, dbus/listnames is a command line tool. No reason
to set WIN32_EXECUTABLE, MACOSX_BUNDLE here.
Pick-to: 6.3
Change-Id: I99aaf27a0267c5575bd2ee5b6183991fce721f44
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Also consolidate several find_package(Qt6 ...) calls in one call.
Task-number: QTBUG-98867
Change-Id: Idfd5e71f46d4489fac7411cbfadb84437a0658f3
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
In the effort of repairing broken links as per QTBUG-96127,
a series of RFC links referring to `tools.ietf.org/html/*` were modified
to point to the new address that the site redirected to.
To simplify executing a similar task and to diminish the duplication of
manually inserted urls, the already existing `rfc.qdoc` file, containing
`\externalpage` commands directing to RFC locations, was enhanced with
links to all RFCs that were mentioned in the current documentation, so
as to aggregate this common category of links.
All links pointing to a `ietf` domain inside QDoc documentation blocks
were then changed to use the newly provided external-references.
Task-number: QTBUG-96127
Pick-to: 6.2
Change-Id: I2a52eb6aa8c9e346f64ef1a627b039220d9f6c2a
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
- Fix linking to CMake manual.
- Remove references to the state machine framework.
Task-number: QTBUG-86295
Change-Id: I01a61088da8eb36760949f39be5e71d92de956f2
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
As well as the MACOSX_BUNDLE properties as necessary.
Task-number: QTBUG-87664
Task-number: QTBUG-86827
Change-Id: I7677449a26d51fa853bd67bab6b3b61afbd2b12f
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Also remove the example code for deprecated methods and use CBOR instead
where it makes sense.
Task-number: QTBUG-81068
Change-Id: Iffb7a4b3d7b16a1e485fc05b3ab2e2468e9e0718
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
This changes many different CMake places to mention Qt6 instead of
Qt5.
Note that some old qt5 cmake config files in corelib are probably not
needed anymore, but I still renamed and kept them for now.
Change-Id: Ie69e81540386a5af153f76c0242e18d48211bec4
* Simplify add_qt_gui_executable() to not require WIN32/MACOSX_BUNDLE
but provide it implicitly. It's redundant :)
* When on Android, build a module (shared library), just like qmake.
This requires an additional library destination in the install() call,
but that's ignored on other platforms.
* Fix typos in the android deployment generation settings function
* Use the correct cache variable to determine whether we're inside a Qt
build or not. Right now this only works inside Qt builds anyway as
QtPlatformAndroid.cmake is not publically accessible.
Change-Id: If1c763c31a7a83d0e0d854362ba7901657f63eb5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
Create CMake config files which can be used from the very same CMake
project. These CMake config files simply do not create any targets,
controlled via the QT_NO_CREATE_TARGETS.
This patch also allows to build qtbase.git:examples as a standalone
project, against an already-built Qt.
Ran this:
ag -s "QT " examples -l -0 | xargs -0 -n 1 .../util/cmake/pro2cmake.py --is-example
Task-number: QTBUG-74713
Change-Id: I44cce5a4048618b30f890c5b789592c227a8b47d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
