Projects were modified using the tool at:
https://git.qt.io/alcroito/cmake_refactor
A couple of examples had to be adapted manually, due to them including
more than one app per example subdirectory.
The INSTALL_EXAMPLESDIR and INSTALL_EXAMPLEDIR assignments were
removed.
The install(TARGETS) calls were modified according to our
documentation snippets for qt_generate_deploy_app_script.
A qt_generate_deploy_app_script call was added for each executable
target.
Note that the deployment step will be skipped in the CI for now,
because we enable QT_DEPLOY_MINIMAL_EXAMPLES and thus
QT_INTERNAL_SKIP_DEPLOYMENT, and also because standalone examples
are not enabled yet, and deployment is disabled for in-tree (so
no-standalone-example) prefix builds.
The install(TARGETS) calls for each example will still run,
installing the examples into an installed_examples directory, that
will not be archived by the CI.
Pick-to: 6.7
Task-number: QTBUG-102056
Task-number: QTBUG-102057
Change-Id: Ida389bbad41710b2ae5da4d95e2d85be9e0cd9ce
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Example takes precedent over build system file type.
According to QUIP-18 [1], all examples file should be
LicenseRef-Qt-Commercial OR BSD-3-Clause
[1]: https://contribute.qt-project.org/quips/18
Pick-to: 6.7
Task-number: QTBUG-121787
Change-Id: Id348a89884bb309b96abb31077f14a51086b5d0c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kai Köhne <kai.koehne@qt.io>
We don't key it on IP address anymore so we can drop
the use of QMultiHash.
This also requires moving the connections for error and disconnected
to readyForUse so we don't remove an active connection when a second
connection attempt happens from the same peer process.
But since we still need to deallocate those connection attempts
if they error out or simply disconnect, we connect their signals to the
QObject::deleteLater slot. In some cases we might call deleteLater twice
but that's fine.
Change-Id: I48c27de1e51a52ef61cfb941a7a81b358ae9ce3f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Konrad Kujawa <konrad.kujawa@qt.io>
The system was just treating IP (and optionally port) as a unique
identifier, so if a peer had multiple possible paths to a client they
would connect multiple times.
This fixes that by generating using QUuid in each client.
We then use this during broadcast, replacing the username we
sent before (which was not used), and as part of the greeting.
The greeting now is more complex, since we need to send both
username and the ID.
Change-Id: I6c6c2ffd5198406aad48445a68dd6aab36de69c0
Reviewed-by: Konrad Kujawa <konrad.kujawa@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
If we are already disconnected we end up printing warnings about how it's
illegal to call waitForBytesWritten on an unconnected socket
Change-Id: I8c864d105d5372edfee84affb362cca3021b8ea0
Reviewed-by: Konrad Kujawa <konrad.kujawa@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The if statements were originally broken to fit 80-column width
but didn't have the braces we typically require.
It anyway fits inside our new 100-column width, so just do that.
Task-number: QTBUG-108873
Change-Id: Ib632f35607e6b716141c4c5d8211de7a0745c6ab
Reviewed-by: Konrad Kujawa <konrad.kujawa@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Using only the key means all clients with that IP address are removed.
But there could be multiple clients running on the same multi-user
system.
So, use the value as well to remove just the specific one.
This also fixes a bug where, when a client disconnects, all of the
connections are removed from the client's map, but only _one_ is removed
from the GUI.
Task-number: QTBUG-108873
Change-Id: I87da862e8f337fd9c246ff5a2d243e514076fa5f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Konrad Kujawa <konrad.kujawa@qt.io>
It is a best practice after all
Task-number: QTBUG-108873
Change-Id: I11c23c080f6fe7f124e461affa88279d5def93f9
Reviewed-by: Konrad Kujawa <konrad.kujawa@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Where possible
Task-number: QTBUG-108873
Change-Id: I8125ffd63cd0ad1970575fb1a6b85021c03c38d5
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Konrad Kujawa <konrad.kujawa@qt.io>
Prefer own headers, avoid full-module includes
Task-number: QTBUG-108873
Change-Id: I4282d4aab5fd66c64fc27cd130b223d33069d80f
Reviewed-by: Konrad Kujawa <konrad.kujawa@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
We (almost) only build apps, for which PRIVATE linkage makes more sense.
Change-Id: I09a509c3fb33a00cdfdede687b3f95d638f42091
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
This is what we promote also in the documentation.
Change-Id: If91aebafe861b0c934acbb2c69afd182abc3345d
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
We've been requiring C++17 since Qt 6.0, and our qAsConst use finally
starts to bother us (QTBUG-99313), so time to port away from it
now.
Since qAsConst has exactly the same semantics as std::as_const (down
to rvalue treatment, constexpr'ness and noexcept'ness), there's really
nothing more to it than a global search-and-replace, with manual
unstaging of the actual definition and documentation in dist/,
src/corelib/doc/ and src/corelib/global/.
Task-number: QTBUG-99313
Change-Id: I4c7114444a325ad4e62d0fcbfd347d2bbfb21541
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
CMakeLists.txt and .cmake files of significant size
(more than 2 lines according to our check in tst_license.pl)
now have the copyright and license header.
Existing copyright statements remain intact
Task-number: QTBUG-88621
Change-Id: I3b98cdc55ead806ec81ce09af9271f9b95af97fa
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Replace the current license disclaimer in files by
a SPDX-License-Identifier.
Files that have to be modified by hand are modified.
License files are organized under LICENSES directory.
Task-number: QTBUG-67283
Change-Id: Id880c92784c40f3bbde861c0d93f58151c18b9f1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
CMAKE_INCLUDE_CURRENT_DIR is not necessary anymore for moc since
CMake 3.8: https://cmake.org/cmake/help/latest/release/3.8.html#other-changes
CMAKE_AUTORCC should not be used anymore. Instead, we now use
qt_add_resources() or similar
Enable CMAKE_AUTOUIC only if .ui files are present.
Pick-to: 6.3
Task-number: QTBUG-87643
Change-Id: I835e2994cd5dba9918136999499b9077961b616c
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Also consolidate several find_package(Qt6 ...) calls in one call.
Task-number: QTBUG-98867
Change-Id: Idfd5e71f46d4489fac7411cbfadb84437a0658f3
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
As well as the MACOSX_BUNDLE properties as necessary.
Task-number: QTBUG-87664
Task-number: QTBUG-86827
Change-Id: I7677449a26d51fa853bd67bab6b3b61afbd2b12f
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
[ChangeLog][Deprecation Notice] QAbstractSocket::error() (the signal) is deprecated; superseded by errorOccurred()
Change-Id: I11e9c774d7c6096d1e9b37c451cf0b99188b6aad
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Because bearer management is going away
Change-Id: I60439c1714e0350b0f2bbef6afc8d2015886135f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Cleanup network examples:
- use nullptr
- use member-init
- adjust includes
- use new-style connects
Change-Id: I80aa230168e5aec88a1bc93bbf49a471bfc30e7b
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This changes many different CMake places to mention Qt6 instead of
Qt5.
Note that some old qt5 cmake config files in corelib are probably not
needed anymore, but I still renamed and kept them for now.
Change-Id: Ie69e81540386a5af153f76c0242e18d48211bec4
* Simplify add_qt_gui_executable() to not require WIN32/MACOSX_BUNDLE
but provide it implicitly. It's redundant :)
* When on Android, build a module (shared library), just like qmake.
This requires an additional library destination in the install() call,
but that's ignored on other platforms.
* Fix typos in the android deployment generation settings function
* Use the correct cache variable to determine whether we're inside a Qt
build or not. Right now this only works inside Qt builds anyway as
QtPlatformAndroid.cmake is not publically accessible.
Change-Id: If1c763c31a7a83d0e0d854362ba7901657f63eb5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
Provide add_qt_gui_executable() as function in our public API that takes
care of automaticWinMain linkage. We can use this in the future to
encapsulate similarplatform-specific behavior and adjustments, such as
module generation onAndroid.
In order for the examples to see the function in Qt5CoreMacros, three more
additional fixes were required:
* Do the build_repo_end() call _before_ attempting to build the
examples, as we need the build_repo_end() to include QtPostProcess
and complete the creation of all the target config files.
Otherwise the find_package() calls in the examples see something
incomplete.
* Add more QT_NO_CREATE_TARGET guards
* Always call find_dependency on the dependencies, regardless of the
target creation mode. This way a find_package(Qt5 COMPONENTS
Widgets) will still load Qt5CoreMacros.
Change-Id: I03ce856e2f4312a050fe8043b8331cbe8a6c93e6
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Create CMake config files which can be used from the very same CMake
project. These CMake config files simply do not create any targets,
controlled via the QT_NO_CREATE_TARGETS.
This patch also allows to build qtbase.git:examples as a standalone
project, against an already-built Qt.
Ran this:
ag -s "QT " examples -l -0 | xargs -0 -n 1 .../util/cmake/pro2cmake.py --is-example
Task-number: QTBUG-74713
Change-Id: I44cce5a4048618b30f890c5b789592c227a8b47d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Replace deprecated foreach macro with range-based for loop
Change-Id: I0d1f2cfd557d02ccc48b41b3fea137baa2962fc1
Reviewed-by: André Hartmann <aha_1980@gmx.de>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Instead of sending one @-separated message, send one CBOR message. The
message structure is, using the CBOR Data Definition Language:
broadcast = [
username: tstr,
port: 0..65535
]
Change-Id: Ic38ec929fc3f4bb795dafffd150ac2614d18c6bf
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This complements the previous commit, which changed the broadcast
datagram to CBOR. This commit changes the TCP protocol too. The protocol
is an infinite array of commands, each of which is a map from an integer
(the DataType enum) to either a string or null.
The entire state machine for the connection is rewritten, relying on
QCborStreamReader's ability to deal with incomplete data.
Change-Id: Ic38ec929fc3f4bb795dafffd150ac674c32fac87
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Since we bind to QHostAddress::Any, the incoming packets are actually
IPv4-mapped IPv6 addresses and the operator== strict comparison was
failing. Instead, use isEqual(), which defaults to TolerantComparison.
Change-Id: Ic38ec929fc3f4bb795dafffd150ac6b3a0a7e3b2
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
