Changes made according to HLD/LLD.
The following is an excerption from the WL. 1. Change so that MIXED is default format 1.1 to change the default for command line --binlog-format 1.2 to alter global_system_variables.binlog_format calculation basing on command line --binlog-format parameter and its default. 2. Change test suite so that more testing is done by MIXED format. 2.1 to check if there are test cases requiring --binlog-foramt=statement via `source include/have_binlog_format_statement.inc' and affected by altering the latter to be "mixed". 2.2 to check the content of such vulnerable cases to find if extending to the mixed does not modify results. In that case simply substitute source arguments as explained. 2.3 if a test in mixed mode deals with features triggering row-binlogging then if necessary we can switch explicitly to statement mode or create another test to run with non-recommended STATEMENT mode Particullarily, extracting INSERT DELAYED binlogging subtest for statement mode is performed, and the snippet is moved into a separate test file. Note that since now all three modes verify this use case through 3 different tests. No changes in item 3 of HLD appeared to be needed.
This commit is contained in:
parent
e49db547e6
commit
7be4bc4e55
@ -60,24 +60,4 @@ insert into t1 values(null);
|
||||
select * from t1;
|
||||
drop table t1;
|
||||
|
||||
# Test of binlogging of INSERT_ID with INSERT DELAYED
|
||||
create table t1 (a int not null auto_increment, primary key (a)) engine=myisam;
|
||||
# First, avoid BUG#20627:
|
||||
set @@session.auto_increment_increment=1, @@session.auto_increment_offset=1;
|
||||
# Verify that only one INSERT_ID event is binlogged.
|
||||
insert delayed into t1 values (207);
|
||||
|
||||
# We use sleeps between statements, that's the only way to get a
|
||||
# repeatable binlog in a normal test run and under Valgrind.
|
||||
# It may be that the "binlog missing rows" of BUG#20821 shows up
|
||||
# here.
|
||||
sleep 2;
|
||||
insert delayed into t1 values (null);
|
||||
sleep 2;
|
||||
insert delayed into t1 values (300);
|
||||
sleep 2; # time for the delayed queries to reach disk
|
||||
select * from t1;
|
||||
--replace_column 2 # 5 #
|
||||
--replace_regex /table_id: [0-9]+/table_id: #/
|
||||
show binlog events from 102;
|
||||
drop table t1;
|
||||
-- source extra/binlog_tests/binlog_insert_delayed.test
|
||||
|
22
mysql-test/extra/binlog_tests/binlog_insert_delayed.test
Normal file
22
mysql-test/extra/binlog_tests/binlog_insert_delayed.test
Normal file
@ -0,0 +1,22 @@
|
||||
# Test of binlogging of INSERT_ID with INSERT DELAYED
|
||||
create table t1 (a int not null auto_increment, primary key (a)) engine=myisam;
|
||||
# First, avoid BUG#20627:
|
||||
set @@session.auto_increment_increment=1, @@session.auto_increment_offset=1;
|
||||
# Verify that only one INSERT_ID event is binlogged.
|
||||
# Note, that because of WL#3368 mixed mode binlog records RBR events for the delayed
|
||||
insert delayed into t1 values (207);
|
||||
|
||||
# We use sleeps between statements, that's the only way to get a
|
||||
# repeatable binlog in a normal test run and under Valgrind.
|
||||
# It may be that the "binlog missing rows" of BUG#20821 shows up
|
||||
# here.
|
||||
sleep 2;
|
||||
insert delayed into t1 values (null);
|
||||
sleep 2;
|
||||
insert delayed into t1 values (300);
|
||||
sleep 2; # time for the delayed queries to reach disk
|
||||
select * from t1;
|
||||
--replace_column 2 # 5 #
|
||||
--replace_regex /table_id: [0-9]+/table_id: #/
|
||||
show binlog events from 102;
|
||||
drop table t1;
|
@ -1,5 +1,5 @@
|
||||
# Requires statement logging
|
||||
-- source include/have_binlog_format_statement.inc
|
||||
-- source include/have_binlog_format_mixed_or_statement.inc
|
||||
|
||||
# See if replication of a "LOAD DATA in an autoincrement column"
|
||||
# Honours autoincrement values
|
||||
|
@ -1,4 +1,4 @@
|
||||
-- source include/have_binlog_format_statement.inc
|
||||
-- source include/have_binlog_format_mixed_or_statement.inc
|
||||
-- source include/master-slave.inc
|
||||
|
||||
create table t1 (word char(20) not null);
|
||||
|
@ -2,7 +2,7 @@
|
||||
# This test will fail if the server/client does not support enough charsets.
|
||||
|
||||
# Requires statement logging
|
||||
-- source include/have_binlog_format_statement.inc
|
||||
-- source include/have_binlog_format_mixed_or_statement.inc
|
||||
|
||||
source include/master-slave.inc;
|
||||
--disable_warnings
|
||||
|
4
mysql-test/include/have_binlog_format_mixed.inc
Normal file
4
mysql-test/include/have_binlog_format_mixed.inc
Normal file
@ -0,0 +1,4 @@
|
||||
-- require r/have_binlog_format_mixed.require
|
||||
disable_query_log;
|
||||
show variables like "binlog_format";
|
||||
enable_query_log;
|
@ -0,0 +1,5 @@
|
||||
--require r/have_binlog_format_statement.require
|
||||
--disable_query_log
|
||||
--replace_result MIXED STATEMENT
|
||||
show variables like "binlog_format";
|
||||
--enable_query_log
|
18
mysql-test/r/binlog_statement_insert_delayed.result
Normal file
18
mysql-test/r/binlog_statement_insert_delayed.result
Normal file
@ -0,0 +1,18 @@
|
||||
create table t1 (a int not null auto_increment, primary key (a)) engine=myisam;
|
||||
set @@session.auto_increment_increment=1, @@session.auto_increment_offset=1;
|
||||
insert delayed into t1 values (207);
|
||||
insert delayed into t1 values (null);
|
||||
insert delayed into t1 values (300);
|
||||
select * from t1;
|
||||
a
|
||||
207
|
||||
208
|
||||
300
|
||||
show binlog events from 102;
|
||||
Log_name Pos Event_type Server_id End_log_pos Info
|
||||
master-bin.000001 # Query 1 # use `test`; create table t1 (a int not null auto_increment, primary key (a)) engine=myisam
|
||||
master-bin.000001 # Query 1 # use `test`; insert delayed into t1 values (207)
|
||||
master-bin.000001 # Intvar 1 # INSERT_ID=208
|
||||
master-bin.000001 # Query 1 # use `test`; insert delayed into t1 values (null)
|
||||
master-bin.000001 # Query 1 # use `test`; insert delayed into t1 values (300)
|
||||
drop table t1;
|
@ -172,8 +172,10 @@ master-bin.000001 # Intvar 1 # INSERT_ID=127
|
||||
master-bin.000001 # Query 1 # use `test`; insert into t1 values(null)
|
||||
master-bin.000001 # Query 1 # use `test`; drop table t1
|
||||
master-bin.000001 # Query 1 # use `test`; create table t1 (a int not null auto_increment, primary key (a)) engine=myisam
|
||||
master-bin.000001 # Query 1 # use `test`; insert delayed into t1 values (207)
|
||||
master-bin.000001 # Intvar 1 # INSERT_ID=208
|
||||
master-bin.000001 # Query 1 # use `test`; insert delayed into t1 values (null)
|
||||
master-bin.000001 # Query 1 # use `test`; insert delayed into t1 values (300)
|
||||
master-bin.000001 # Table_map 1 # table_id: # (test.t1)
|
||||
master-bin.000001 # Write_rows 1 # table_id: # flags: STMT_END_F
|
||||
master-bin.000001 # Table_map 1 # table_id: # (test.t1)
|
||||
master-bin.000001 # Write_rows 1 # table_id: # flags: STMT_END_F
|
||||
master-bin.000001 # Table_map 1 # table_id: # (test.t1)
|
||||
master-bin.000001 # Write_rows 1 # table_id: # flags: STMT_END_F
|
||||
drop table t1;
|
||||
|
2
mysql-test/r/have_binlog_format_mixed.require
Normal file
2
mysql-test/r/have_binlog_format_mixed.require
Normal file
@ -0,0 +1,2 @@
|
||||
Variable_name Value
|
||||
binlog_format MIXED
|
@ -5,9 +5,6 @@ reset slave;
|
||||
drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
|
||||
start slave;
|
||||
SET BINLOG_FORMAT=MIXED;
|
||||
SELECT @@GLOBAL.BINLOG_FORMAT, @@SESSION.BINLOG_FORMAT;
|
||||
@@GLOBAL.BINLOG_FORMAT @@SESSION.BINLOG_FORMAT
|
||||
STATEMENT MIXED
|
||||
SET GLOBAL BINLOG_FORMAT=MIXED;
|
||||
SELECT @@GLOBAL.BINLOG_FORMAT, @@SESSION.BINLOG_FORMAT;
|
||||
@@GLOBAL.BINLOG_FORMAT @@SESSION.BINLOG_FORMAT
|
||||
|
@ -3,7 +3,7 @@
|
||||
# Taken FROM the select test
|
||||
#
|
||||
-- source include/have_archive.inc
|
||||
-- source include/have_binlog_format_statement.inc
|
||||
-- source include/have_binlog_format_mixed_or_statement.inc
|
||||
|
||||
--disable_warnings
|
||||
drop table if exists t1,t2,t3;
|
||||
|
6
mysql-test/t/binlog_statement_insert_delayed.test
Normal file
6
mysql-test/t/binlog_statement_insert_delayed.test
Normal file
@ -0,0 +1,6 @@
|
||||
# This test is to verify replication with INSERT DELAY through
|
||||
# unrecommended STATEMENT binlog format
|
||||
|
||||
-- source include/not_embedded.inc
|
||||
-- source include/have_binlog_format_statement.inc
|
||||
-- source extra/binlog_tests/binlog_insert_delayed.test
|
@ -13,6 +13,6 @@ drop table t1;
|
||||
# For both statement and row based bin logs 9/19/2005 [jbm]
|
||||
|
||||
-- source include/not_embedded.inc
|
||||
-- source include/have_binlog_format_statement.inc
|
||||
-- source include/have_binlog_format_mixed.inc
|
||||
-- source extra/binlog_tests/binlog.test
|
||||
|
||||
|
@ -2,5 +2,5 @@
|
||||
# For both statement and row based bin logs 9/19/2005 [jbm]
|
||||
|
||||
-- source include/not_embedded.inc
|
||||
-- source include/have_binlog_format_statement.inc
|
||||
-- source include/have_binlog_format_mixed_or_statement.inc
|
||||
-- source extra/binlog_tests/blackhole.test
|
||||
|
@ -2,5 +2,5 @@
|
||||
# For both statement and row based bin logs 9/19/2005 [jbm]
|
||||
|
||||
-- source include/not_embedded.inc
|
||||
-- source include/have_binlog_format_statement.inc
|
||||
-- source include/have_binlog_format_mixed_or_statement.inc
|
||||
-- source extra/binlog_tests/ctype_cp932.test
|
||||
|
@ -1,6 +1,6 @@
|
||||
# This is a wrapper for binlog.test so that the same test case can be used
|
||||
# For both statement and row based bin logs 9/19/2005 [jbm]
|
||||
|
||||
-- source include/have_binlog_format_statement.inc
|
||||
-- source include/have_binlog_format_mixed_or_statement.inc
|
||||
-- source extra/binlog_tests/ctype_ucs_binlog.test
|
||||
|
||||
|
@ -1,5 +1,5 @@
|
||||
# This is a wrapper for binlog.test so that the same test case can be used
|
||||
# For both statement and row based bin logs 9/19/2005 [jbm]
|
||||
|
||||
-- source include/have_binlog_format_statement.inc
|
||||
-- source include/have_binlog_format_mixed_or_statement.inc
|
||||
-- source extra/binlog_tests/drop_temp_table.test
|
||||
|
@ -1,5 +1,5 @@
|
||||
# This is a wrapper for binlog.test so that the same test case can be used
|
||||
# For both statement and row based bin logs 9/19/2005 [jbm]
|
||||
|
||||
-- source include/have_binlog_format_statement.inc
|
||||
-- source include/have_binlog_format_mixed_or_statement.inc
|
||||
-- source extra/binlog_tests/innodb_stat.test
|
||||
|
@ -1,5 +1,5 @@
|
||||
# This is a wrapper for binlog.test so that the same test case can be used
|
||||
# For both statement and row based bin logs 9/19/2005 [jbm]
|
||||
|
||||
-- source include/have_binlog_format_statement.inc
|
||||
-- source include/have_binlog_format_mixed_or_statement.inc
|
||||
-- source extra/binlog_tests/insert_select-binlog.test
|
||||
|
@ -1,7 +1,7 @@
|
||||
# This is a wrapper for binlog.test so that the same test case can be used
|
||||
# For both statement and row based bin logs 9/19/2005 [jbm]
|
||||
|
||||
-- source include/have_binlog_format_statement.inc
|
||||
-- source include/have_binlog_format_mixed_or_statement.inc
|
||||
-- source extra/binlog_tests/mix_innodb_myisam_binlog.test
|
||||
|
||||
# This piece below cannot be put into
|
||||
|
@ -6,7 +6,7 @@
|
||||
# inconsistency between binlog and the internal list of temp tables.
|
||||
|
||||
# This does not work for RBR yet.
|
||||
--source include/have_binlog_format_statement.inc
|
||||
--source include/have_binlog_format_mixed_or_statement.inc
|
||||
|
||||
-- source include/have_innodb.inc
|
||||
--disable_warnings
|
||||
|
@ -1,7 +1,7 @@
|
||||
# This is a wrapper for binlog.test so that the same test case can be used
|
||||
# For both statement and row based bin logs 11/07/2005 [jbm]
|
||||
|
||||
-- source include/have_binlog_format_statement.inc
|
||||
-- source include/have_binlog_format_mixed_or_statement.inc
|
||||
-- source extra/binlog_tests/ctype_cp932_binlog.test
|
||||
|
||||
#
|
||||
|
@ -6,9 +6,9 @@
|
||||
drop table if exists t1;
|
||||
--enable_warnings
|
||||
|
||||
--replace_result ROW <format> STATEMENT <format>
|
||||
--replace_result ROW <format> STATEMENT <format> MIXED <format>
|
||||
SHOW GLOBAL VARIABLES LIKE "%_format%";
|
||||
--replace_result ROW <format> STATEMENT <format>
|
||||
--replace_result ROW <format> STATEMENT <format> MIXED <format>
|
||||
SHOW SESSION VARIABLES LIKE "%_format%";
|
||||
|
||||
#
|
||||
@ -36,7 +36,7 @@ set datetime_format= '%H:%i:%s.%f %m-%d-%Y';
|
||||
set datetime_format= '%h:%i:%s %p %Y-%m-%d';
|
||||
set datetime_format= '%h:%i:%s.%f %p %Y-%m-%d';
|
||||
|
||||
--replace_result ROW <format> STATEMENT <format>
|
||||
--replace_result ROW <format> STATEMENT <format> MIXED <format>
|
||||
SHOW SESSION VARIABLES LIKE "%format";
|
||||
|
||||
--error 1231
|
||||
|
@ -1,6 +1,6 @@
|
||||
# We are using .opt file since we need small binlog size
|
||||
# TODO: Need to look at making a row based version once the new row based client is completed. [jbm]
|
||||
-- source include/have_binlog_format_statement.inc
|
||||
-- source include/have_binlog_format_mixed_or_statement.inc
|
||||
|
||||
# Embedded server doesn't support binlogging
|
||||
-- source include/not_embedded.inc
|
||||
|
@ -2,7 +2,7 @@
|
||||
# and a few others.
|
||||
|
||||
# TODO: Need to look at making row based version once new binlog client is complete.
|
||||
-- source include/have_binlog_format_statement.inc
|
||||
-- source include/have_binlog_format_mixed_or_statement.inc
|
||||
|
||||
# Embedded server doesn't support binlogging
|
||||
-- source include/not_embedded.inc
|
||||
|
@ -1,7 +1,7 @@
|
||||
-- source include/have_ndb.inc
|
||||
-- source include/have_multi_ndb.inc
|
||||
-- source include/not_embedded.inc
|
||||
-- source include/have_binlog_format_statement.inc
|
||||
-- source include/have_binlog_format_mixed_or_statement.inc
|
||||
|
||||
--disable_warnings
|
||||
connection server2;
|
||||
|
@ -7,7 +7,7 @@
|
||||
# in row-based, it hangs waiting for an offset which is never
|
||||
# reached (the "sync_with_master 1"), logically.
|
||||
|
||||
--source include/have_binlog_format_statement.inc
|
||||
--source include/have_binlog_format_mixed_or_statement.inc
|
||||
source include/master-slave.inc;
|
||||
save_master_pos;
|
||||
connection slave;
|
||||
|
@ -1,5 +1,5 @@
|
||||
# Requires statement logging
|
||||
-- source include/have_binlog_format_statement.inc
|
||||
-- source include/have_binlog_format_mixed_or_statement.inc
|
||||
|
||||
# You must run this test with --manager.
|
||||
|
||||
|
@ -2,7 +2,7 @@
|
||||
# replicated LOAD DATA INFILE correctly when it has binlog_*_db rules.
|
||||
# This is for BUG#1100 (LOAD DATA INFILE was half-logged).
|
||||
|
||||
-- source include/have_binlog_format_statement.inc
|
||||
-- source include/have_binlog_format_mixed_or_statement.inc
|
||||
-- source include/master-slave.inc
|
||||
|
||||
connection slave;
|
||||
|
@ -1,7 +1,7 @@
|
||||
# Mixed DDL-DML (CREATE ... SELECT ...) statements can only be
|
||||
# replicated properly in statement-based replication.
|
||||
# Currently statement based due to bug 12345
|
||||
--source include/have_binlog_format_statement.inc
|
||||
--source include/have_binlog_format_mixed_or_statement.inc
|
||||
|
||||
source include/master-slave.inc;
|
||||
|
||||
|
@ -1,12 +1,11 @@
|
||||
-- source include/have_row_based.inc
|
||||
-- source include/have_binlog_format_statement.inc
|
||||
-- source include/have_binlog_format_mixed_or_statement.inc
|
||||
-- source include/master-slave.inc
|
||||
|
||||
# Test that the slave temporarily switches to ROW when seeing binrow
|
||||
# events when it is in STATEMENT or MIXED mode
|
||||
|
||||
SET BINLOG_FORMAT=MIXED;
|
||||
SELECT @@GLOBAL.BINLOG_FORMAT, @@SESSION.BINLOG_FORMAT;
|
||||
SET GLOBAL BINLOG_FORMAT=MIXED;
|
||||
SELECT @@GLOBAL.BINLOG_FORMAT, @@SESSION.BINLOG_FORMAT;
|
||||
|
||||
|
@ -1,5 +1,5 @@
|
||||
# TBF - difference in row level logging
|
||||
-- source include/have_binlog_format_statement.inc
|
||||
-- source include/have_binlog_format_mixed_or_statement.inc
|
||||
-- source include/master-slave.inc
|
||||
|
||||
--disable_warnings
|
||||
|
@ -13,7 +13,7 @@
|
||||
# - Test creating a duplicate key error and recover from it
|
||||
|
||||
# Requires statement logging
|
||||
-- source include/have_binlog_format_statement.inc
|
||||
-- source include/have_binlog_format_mixed_or_statement.inc
|
||||
|
||||
connect (master,localhost,root,,test,$MASTER_MYPORT,$MASTER_MYSOCK);
|
||||
--disable_warnings
|
||||
|
@ -3,6 +3,6 @@
|
||||
# Date: 2006-01-11
|
||||
# Purpose: Engine Wrapper for rpl_stm_EE_err2.test
|
||||
##############################
|
||||
-- source include/have_binlog_format_statement.inc
|
||||
-- source include/have_binlog_format_mixed_or_statement.inc
|
||||
let $engine_type=myisam;
|
||||
-- source extra/rpl_tests/rpl_stm_EE_err2.test
|
||||
|
@ -1,5 +1,5 @@
|
||||
# depends on the binlog output
|
||||
--source include/have_binlog_format_statement.inc
|
||||
--source include/have_binlog_format_mixed_or_statement.inc
|
||||
|
||||
let $rename_event_pos= 652;
|
||||
-- source extra/rpl_tests/rpl_flsh_tbls.test
|
||||
|
@ -1,5 +1,5 @@
|
||||
# Requires statement logging
|
||||
-- source include/have_binlog_format_statement.inc
|
||||
-- source include/have_binlog_format_mixed_or_statement.inc
|
||||
let $engine_type=MyISAM;
|
||||
-- source extra/rpl_tests/rpl_log.test
|
||||
|
||||
|
@ -4,7 +4,7 @@
|
||||
# Test of manual relay log rotation with FLUSH LOGS.
|
||||
|
||||
# Requires statement logging
|
||||
-- source include/have_binlog_format_statement.inc
|
||||
-- source include/have_binlog_format_mixed_or_statement.inc
|
||||
-- source extra/rpl_tests/rpl_max_relay_size.test
|
||||
|
||||
# End of 4.1 tests
|
||||
|
@ -4,7 +4,7 @@
|
||||
# one binlog event containing all queries)
|
||||
|
||||
# Requires statement logging
|
||||
-- source include/have_binlog_format_statement.inc
|
||||
-- source include/have_binlog_format_mixed_or_statement.inc
|
||||
-- source extra/rpl_tests/rpl_multi_query.test
|
||||
|
||||
|
||||
|
@ -15,7 +15,7 @@
|
||||
#should proceed in a correct way.
|
||||
#################################
|
||||
|
||||
-- source include/have_binlog_format_statement.inc
|
||||
-- source include/have_binlog_format_mixed_or_statement.inc
|
||||
-- source include/master-slave.inc
|
||||
|
||||
# first, cause a duplicate key problem on the slave
|
||||
|
@ -4,7 +4,7 @@
|
||||
# case. So this test is meaningul only in statement-based (and if it was
|
||||
# enabled in row-based, it would fail as expected).
|
||||
|
||||
-- source include/have_binlog_format_statement.inc
|
||||
-- source include/have_binlog_format_mixed_or_statement.inc
|
||||
|
||||
source include/master-slave.inc;
|
||||
|
||||
|
@ -1,5 +1,5 @@
|
||||
# TBF - difference in row level logging
|
||||
-- source include/have_binlog_format_statement.inc
|
||||
-- source include/have_binlog_format_mixed_or_statement.inc
|
||||
-- source extra/rpl_tests/rpl_reset_slave.test
|
||||
|
||||
# End of 4.1 tests
|
||||
|
@ -1,4 +1,4 @@
|
||||
-- source include/have_binlog_format_statement.inc
|
||||
-- source include/have_binlog_format_mixed_or_statement.inc
|
||||
-- source include/master-slave.inc
|
||||
|
||||
# Test is dependent on binlog positions
|
||||
|
@ -1,7 +1,7 @@
|
||||
# drop table t1 t2 t3 are included int master-slave.inc
|
||||
# meaningful only in statement-based:
|
||||
|
||||
-- source include/have_binlog_format_statement.inc
|
||||
-- source include/have_binlog_format_mixed_or_statement.inc
|
||||
-- source include/master-slave.inc
|
||||
|
||||
|
||||
|
@ -2,7 +2,7 @@
|
||||
# Test of triggers with replication
|
||||
# Adding statement include due to Bug 12574
|
||||
# TODO: Remove statement include once 12574 is patched
|
||||
--source include/have_binlog_format_statement.inc
|
||||
--source include/have_binlog_format_mixed_or_statement.inc
|
||||
--source include/master-slave.inc
|
||||
|
||||
--disable_warnings
|
||||
|
@ -1,5 +1,5 @@
|
||||
# Requires statement logging
|
||||
-- source include/have_binlog_format_statement.inc
|
||||
-- source include/have_binlog_format_mixed_or_statement.inc
|
||||
|
||||
source include/master-slave.inc;
|
||||
|
||||
|
@ -1,5 +1,5 @@
|
||||
# Requires statement logging
|
||||
-- source include/have_binlog_format_statement.inc
|
||||
-- source include/have_binlog_format_mixed_or_statement.inc
|
||||
# TODO: Create row based version once $MYSQL_BINLOG has new RB version
|
||||
# Embedded server does not support binlogging
|
||||
--source include/not_embedded.inc
|
||||
|
@ -3135,7 +3135,11 @@ with --log-bin instead.");
|
||||
global_system_variables.binlog_format= BINLOG_FORMAT_ROW;
|
||||
else
|
||||
#endif
|
||||
#if defined(HAVE_ROW_BASED_REPLICATION)
|
||||
global_system_variables.binlog_format= BINLOG_FORMAT_MIXED;
|
||||
#else
|
||||
global_system_variables.binlog_format= BINLOG_FORMAT_STMT;
|
||||
#endif
|
||||
}
|
||||
|
||||
/* Check that we have not let the format to unspecified at this point */
|
||||
@ -4936,7 +4940,13 @@ Disable with --skip-bdb (will save memory).",
|
||||
"supports only statement-based binary logging, so only 'statement' is "
|
||||
"a legal value."
|
||||
#endif
|
||||
, 0, 0, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0 },
|
||||
, 0, 0, 0, GET_STR, REQUIRED_ARG,
|
||||
#ifdef HAVE_ROW_BASED_REPLICATION
|
||||
BINLOG_FORMAT_MIXED
|
||||
#else
|
||||
BINLOG_FORMAT_STMT
|
||||
#endif
|
||||
, 0, 0, 0, 0, 0 },
|
||||
{"binlog-do-db", OPT_BINLOG_DO_DB,
|
||||
"Tells the master it should log updates for the specified database, and exclude all others not explicitly mentioned.",
|
||||
0, 0, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
|
||||
|
Loading…
x
Reference in New Issue
Block a user